Troubleshooting
Gyroscope Troubleshooting
Fix phone gyroscope problems on Android and iPhone: no sensor data, blocked motion access, drift, jitter, a dead axis or slow updates. Step-by-step checks.
Published · 4 min read
Most gyroscope problems in a browser are caused by permissions, browser settings or power saving, not broken hardware. Work through the symptom that matches what you see.
No sensor data
The tester says No sensor data received or stays on Listening.
- Use a phone or tablet. Laptops and desktops rarely have a gyroscope.
- Open the page in a real browser. In-app browsers (inside social, chat or email apps) often block sensors. Use Open in Chrome or Open in Safari.
- Check the address starts with https://. Sensors are blocked on insecure pages.
- Check permissions. See Permission denied below.
- Turn off battery saver or Low Power Mode and try again.
- Restart the browser, then the device. A stuck sensor service is usually cleared by a reboot.
Permission denied
iPhone / iPad: Safari remembers a Don’t Allow choice. Close the tab (or quit Safari), reopen the page and tap Start test again. If the prompt doesn’t return, clear this site’s website data in Safari’s settings and reload. Full steps are in the iPhone guide.
Android: In Chrome, tap the site-settings icon next to the address, open Permissions and allow Motion sensors. Also check ⋮ → Settings → Site settings → Motion sensors. Full steps are in the Android guide.
Orientation works, rotation rate missing
The 3D model moves but the X, Y and Z angular-velocity values stay blank. The browser is providing orientation angles but not the gyroscope’s rotationRate. Possible reasons:
- The browser doesn’t expose rotation rate. Try another browser.
- The device has no gyroscope. Some budget Android phones estimate orientation from the accelerometer and compass instead.
Confirm with the live probe on the diagnostics page.
One axis does not respond
In the 3-move test, one move keeps failing while the others work. Check Technical details to see if that axis shows No response.
- Repeat the test with a slower, wider turn around that axis only. The on-screen axis arrows show the direction.
- Test in a second browser.
- If one axis stays flat in every browser while the others respond normally, that is real evidence of a sensor problem. Confirm with a native diagnostic app (many Android phones have a hidden hardware test menu) or a repair service.
Drift and offset
Orientation drift means the 3D model or yaw angle slowly rotates while the device lies still. Yaw drift is common, because without a compass reference small gyroscope errors add up over time. Tap Re-center. Steady drift in pitch or roll is more unusual. Read more in gyroscope drift explained.
Rate offset means the angular velocity doesn’t settle at 0 °/s at rest. The stability test reports it as mean offset. Operating systems normally calibrate this away. A persistent offset above about 2 °/s can make games and AR drift. Restarting the device often triggers recalibration.
Jitter and noise
Some flicker of a few tenths of a degree per second at rest is normal. Run the stability test on a solid table, away from washing machines, vehicles or a vibrating desk. Results graded high after several clean attempts suggest a noisy sensor. A phone case with a magnet can also affect orientation (not the gyroscope itself).
Low update rate
Browsers limit sensor events, usually to around 60 Hz. Rates far below that, or long gaps, are usually caused by power-saving modes, a busy device, or the browser throttling an inactive tab. Close other apps, disable battery saver and keep the tab in the foreground.
Games, AR or 360° video feel wrong
- If this tester works smoothly but one app doesn’t, the problem is probably in that app’s settings (look for gyro or motion controls) or its own calibration.
- If everything feels wrong, run the stability test. A large offset or high noise explains drifting aim and wobbly AR.
- Screen auto-rotate uses the accelerometer, not the gyroscope. A rotation problem alone doesn’t mean the gyroscope is faulty.
When to suspect hardware
Browser data can’t prove a fault on its own. The evidence becomes strong when all of these are true:
- Two different browsers on the same device show the same problem.
- Permissions are allowed and power saving is off.
- A restart didn’t help.
- The problem is specific (one dead axis, a large constant offset, or readings that never change) rather than “no data at all”.
At that point, use the manufacturer’s diagnostics or a repair service. Download the report from the tester and take it with you.
Keep reading
Explainer2 min read
Gyroscope vs Accelerometer
Gyroscope vs accelerometer explained: what each phone sensor measures, their units, strengths and weaknesses, and how sensor fusion combines them for orientation.
Testing3 min read
How to Test a Gyroscope
How to check the gyroscope sensor in your mobile phone, step by step: live readings, a three-axis test and a stability test, and how to tell healthy from faulty.
Explainer4 min read
What Is a Gyroscope?
Gyroscope definition in plain words: how mechanical and digital MEMS gyroscopes work, what a phone gyroscope sensor measures, and what gyroscope sensitivity means.