Free · No app · Private

Gyroscope Test

Check your phone or tablet’s gyroscope right in the browser. See live rotation on all three axes, run guided tests, and get a clear, honest summary.

Live gyroscope tester

Ready to start

Your phone · live

Test your gyroscope

Tap Start test, then move your device.

Test 1

Test your gyroscope in 3 moves

We’ll show one move at a time. Just copy the picture.

  1. 1Lift the topX axis · Pitch
  2. 2Lift the sideY axis · Roll
  3. 3Spin flatZ axis · Yaw

Tap Start test above first.

Technical details

    Orientation

    angle · degrees
    Pitch
    β · about X
    -°
    Roll
    γ · about Y
    -°
    Yaw
    α · about Z
    -°

    Yaw is measured from where it was when you started, not from compass north.

    Angular velocity

    gyroscope · °/s
    • X Pitch-
    • Y Roll-
    • Z Yaw-
    Update rate
    -Hz
    Jitter
    -ms
    Peak
    -°/s

    Angular velocity · last 10 seconds

    • X
    • Y
    • Z

    Test 2

    Stability test

    Lay the device on a firm, flat surface and don’t touch it. For 10 seconds the tester measures how much the gyroscope readings vary when nothing is moving.

    Results

    Diagnostic summary

    Start the test to see a summary of what your browser and sensor report.

    Readings are processed on your device and nothing is uploaded. Browsers give web pages filtered, rate-limited sensor data, so a missing or odd reading does not prove the hardware is faulty.

    What it measures

    More than a spinning phone

    Every number on this page comes from your device’s sensors as your browser reports them. Nothing is simulated.

    How it works

    About this online gyroscope test

    An online gyroscope test checks the motion sensor in your phone or tablet without installing an app. The page reads the same motion data that games, maps and AR apps use and shows it live, so you can see whether the sensor responds as it should.

    How to test your gyroscope

    1. Tap Start test. On iPhone and iPad, tap Allow when Safari asks for motion access.
    2. Tap Test all 3 moves and copy each move shown on screen.
    3. Lay the device flat for the stability test.

    The step-by-step guide explains each test.

    Pitch, roll, yaw and angular velocity

    A gyroscope measures angular velocity: how fast the device turns, in degrees per second (°/s), around three axes. Tipping the top towards you is pitch (X), tilting sideways is roll (Y), and turning flat on a table is yaw (Z). When the turning stops, a healthy gyroscope reads close to zero again, even if the phone is still tilted.

    The 3D model uses orientation instead: angles the operating system calculates from the gyroscope, accelerometer and often the compass. Because orientation can come from those other sensors, a moving 3D model alone does not prove that raw gyroscope data is available. That is why the tester shows rotation rate separately and checks one against the other.

    Gyroscope vs accelerometer

    An accelerometer measures straight-line acceleration, including gravity, so it knows which way is down but not how fast you turn flat on a table. A gyroscope measures rotation but slowly drifts. Phones combine both; see gyroscope vs accelerometer.

    Digital gyroscopes and sensitivity

    Phones use a tiny digital gyroscope: a MEMS chip whose vibrating structure turns rotation into a digital signal. Its sensitivity is about how small a rotation it detects and how much it flickers at rest; the stability test measures that noise and any resting offset. A game’s sensitivity slider is a separate setting that only scales how far the view moves. More in what is a gyroscope?

    Android, iPhone and browser compatibility

    The test works in current mobile browsers: Chrome, Samsung Internet, Edge or Firefox on Android, and Safari or any other browser on iPhone and iPad. Most desktops and laptops have no gyroscope. The Android and iPhone pages cover permission settings.

    Common problems

    • No data: motion access is blocked or the device has no gyroscope. The diagnostics page shows which.
    • Drift: a small resting offset is normal; see gyroscope drift.
    • Jumpy readings: battery saver can throttle sensor updates.

    Browsers receive filtered data from the operating system, so this is a useful first check, not a definitive hardware diagnosis. If results look wrong, follow the troubleshooting guide before booking a repair.

    Reading results

    What healthy readings look like

    Use these as a rough guide. Values differ between devices and browsers.

    CheckTypically healthyWorth re-testing
    At rest on a tableAll three axes within about ±1 °/s of zero, with small flickerOne axis holding a large value or drifting steadily
    Turning around one axisThat axis rises sharply. The other two stay comparatively small.An axis that stays flat while you clearly rotate around it
    Stopping a turnValues drop back to near zero right awayValues that slowly creep back or stay offset
    Update rateCommonly 50–100 Hz on phones, depending on browserVery low or highly irregular rates (often caused by the browser or power saving)

    Your device

    Guides for Android and iPhone

    Privacy

    Your readings stay on your device

    The tester runs entirely in your browser. Sensor readings are never uploaded or stored on a server, and there are no accounts, trackers or ads in the tool. Reports are created on your device and only saved if you download them.

    Read the privacy policy

    Guides

    Learn more about your gyroscope

    All guides

    FAQ

    Common questions

    See all questions

    How do I test my phone’s gyroscope online?

    Open the gyroscope test on your phone, tap Start test and allow motion access if asked. Then rotate the phone slowly around each axis. If the 3D model and the °/s readings follow your movement and settle near zero when you stop, the gyroscope is working.

    Start the gyroscope test

    Does this gyroscope test work on any phone?

    It works on most modern Android phones and iPhones in Chrome, Safari, Samsung Internet, Firefox and Edge. The page must be opened over HTTPS. On iPhone and iPad you need to tap Allow when Safari asks for motion access.

    Why is the gyroscope not working in games like PUBG Mobile or Call of Duty Mobile?

    First check that the gyroscope option is turned on in the game’s controls or sensitivity settings, as it can be off by default. Then run this test. If the readings follow your movement, the sensor works and the problem is in the game: restart the phone, update the game and adjust or recalibrate gyroscope sensitivity in its settings. If the test shows no rotation data, the phone may not have a gyroscope.

    Troubleshooting guide

    Is a failed test proof that my gyroscope is broken?

    No. Browsers give web pages filtered, rate-limited data, and settings, permissions or in-app browsers can block it. Treat an unusual result as a reason to re-test in another browser and, if it persists, use a native diagnostic tool or a repair service.

    Troubleshooting guide

    Is my sensor data uploaded anywhere?

    No. All readings are processed in your browser, and nothing is sent to or stored on a server. Reports are created on your device and only saved if you download them.

    Privacy policy

    Test again any time

    Bookmark this page for after a repair, before buying a used phone, or whenever games and AR feel off.

    Start the gyroscope test