Explainer
What Is a Gyroscope?
Gyroscope definition in plain words: how mechanical and digital MEMS gyroscopes work, what a phone gyroscope sensor measures, and what gyroscope sensitivity means.
Published · 4 min read
A gyroscope is a device that measures or maintains rotation. In a phone or tablet, the gyroscope is a tiny sensor chip that reports how fast the device is turning around each of its three axes.
Gyroscope definition
The word comes from the Greek gyros (circle, rotation) and skopein (to look). The French physicist Léon Foucault named his instrument a gyroscope in 1852, when he used one to demonstrate the Earth’s rotation.
In everyday use, “gyroscope” covers two related things:
- A mechanical gyroscope: a spinning wheel mounted in rings (gimbals). Because a spinning mass resists changes to its axis, the wheel keeps pointing the same way while its frame turns around it.
- A gyroscope sensor: any device that measures rotation rate, or angular velocity. Phones, drones, game controllers, cars and aircraft all use gyroscope sensors, and most of them have no spinning parts at all.
What is a gyroscope sensor in a phone?
The gyroscope sensor in a phone measures angular velocity: how many degrees per second (°/s) the device rotates around three axes. Tipping the top of the phone towards you is rotation around X (pitch), tilting it left or right is rotation around Y (roll), and spinning it flat on a table is rotation around Z (yaw).
A gyroscope does not measure the angle the phone is held at. It measures how fast that angle changes. Hold the phone still at any tilt and a healthy gyroscope reads close to zero on every axis. To work out the actual orientation, the phone adds up the rotation over time and corrects it with the accelerometer and compass. This combination is called sensor fusion, and the gyroscope vs accelerometer guide covers it in detail.
Phone gyroscopes became common after the iPhone 4 included one in 2010. Today almost every smartphone and tablet has one, but some budget Android phones still leave it out to save cost.
How a digital gyroscope works
The gyroscope in a phone is a digital gyroscope built as a MEMS chip (micro-electro-mechanical system), a few millimetres across. Inside, a microscopic structure is kept vibrating at a steady frequency. When the chip rotates, the Coriolis effect pushes that vibrating mass sideways by a tiny amount. Electrodes measure the movement as a change in capacitance, and circuitry on the chip converts it into a digital rotation rate for each axis.
Because a MEMS gyroscope has no spinning wheel, it is cheap, small and uses little power. The trade-off is precision: tiny errors in each reading add up over time, which is why gyroscope-based orientation slowly drifts. The gyroscope drift guide explains why, and why phones correct it automatically.
Aircraft, ships and satellites often use optical gyroscopes instead. These send light both ways around a loop of fibre or a laser path and measure the tiny difference rotation causes. They are far more precise and far more expensive.
What gyroscope sensitivity means
“Sensitivity” is used in two different ways, and it helps to keep them apart.
Sensor sensitivity
For the chip itself, sensitivity describes how its output relates to real rotation and how fine a movement it can resolve. The main properties are:
| Property | What it means |
|---|---|
| Range | The fastest rotation the sensor can measure before it saturates. Phone gyroscopes are often configurable up to around ±2000 °/s. |
| Scale factor | How accurately a real rotation maps to the reported number. A small error makes every reading slightly too high or low. |
| Noise | How much the readings flicker when the device is perfectly still. |
| Bias (offset) | A small non-zero reading at rest, which causes drift if it isn’t corrected. |
You can’t read a phone’s datasheet values from a web browser, but you can observe noise and bias directly. The stability test on the gyroscope test measures both while the device lies flat, and the diagnostics page shows how often your browser delivers readings.
Gyro sensitivity in games
In mobile games and on consoles, “gyro sensitivity” is a setting, not a property of the hardware. It is a multiplier that decides how far the camera or crosshair moves for each degree you rotate the phone or controller. Raising it doesn’t make the sensor more accurate. It amplifies both your movement and the sensor’s natural noise, so very high values can look jittery.
Gyroscope test controller: phones vs game controllers
Many game controllers, such as the DualSense, DualShock 4 and Nintendo Switch controllers, contain a gyroscope for motion aiming. This site tests the gyroscope in phones and tablets only. The standard Gamepad API in web browsers reports buttons and sticks, but not a controller’s motion sensors, so a web page can’t run a reliable controller gyroscope test.
To check a controller’s gyroscope, use the tools built for it:
- Nintendo Switch: System Settings → Controllers and Sensors → Calibrate Motion Controls shows live motion and lets you recalibrate.
- PC with Steam: Steam Input’s controller settings include gyro options and calibration for supported controllers.
- Any controller: a game with gyro aiming and a visible crosshair is a practical test. Rest the controller on a table and watch for creep.
Summary
- A gyroscope measures rotation. A phone’s gyroscope sensor reports angular velocity in °/s around three axes.
- Phones use digital MEMS gyroscopes that detect rotation through the Coriolis effect on a vibrating structure.
- Gyroscopes are combined with the accelerometer and compass to calculate orientation and limit drift.
- Sensor sensitivity is about range, accuracy, noise and bias. In-game gyro sensitivity is just a multiplier.
Keep reading
Explainer2 min read
Gyroscope vs Accelerometer
Gyroscope vs accelerometer explained: what each phone sensor measures, their units, strengths and weaknesses, and how sensor fusion combines them for orientation.
Explainer3 min read
Gyroscope Drift Explained
Why phone gyroscopes drift, the difference between bias and noise, how much drift is normal, and practical ways to reduce drift in games, AR and 360° video.
Troubleshooting4 min read
Gyroscope Troubleshooting
Fix phone gyroscope problems on Android and iPhone: no sensor data, blocked motion access, drift, jitter, a dead axis or slow updates. Step-by-step checks.