iPhone · iPad · Safari

iPhone Gyroscope Test

Tap Start test and choose Allow when Safari asks for motion and orientation access. Apple requires this one-tap permission before any website can read the gyroscope.

Live gyroscope tester

Ready to start

Your phone · live

Test your gyroscope

Tap Start test, then move your device.

Test 1

Test your gyroscope in 3 moves

We’ll show one move at a time. Just copy the picture.

  1. 1Lift the topX axis · Pitch
  2. 2Lift the sideY axis · Roll
  3. 3Spin flatZ axis · Yaw

Tap Start test above first.

Technical details

    Orientation

    angle · degrees
    Pitch
    β · about X
    -°
    Roll
    γ · about Y
    -°
    Yaw
    α · about Z
    -°

    Yaw is measured from where it was when you started, not from compass north.

    Angular velocity

    gyroscope · °/s
    • X Pitch-
    • Y Roll-
    • Z Yaw-
    Update rate
    -Hz
    Jitter
    -ms
    Peak
    -°/s

    Angular velocity · last 10 seconds

    • X
    • Y
    • Z

    Test 2

    Stability test

    Lay the device on a firm, flat surface and don’t touch it. For 10 seconds the tester measures how much the gyroscope readings vary when nothing is moving.

    Results

    Diagnostic summary

    Start the test to see a summary of what your browser and sensor report.

    Readings are processed on your device and nothing is uploaded. Browsers give web pages filtered, rate-limited sensor data, so a missing or odd reading does not prove the hardware is faulty.

    How to test the gyroscope on iPhone or iPad

    1. Open this page in Safari. Chrome, Edge and Firefox on iOS work too, because they use the same WebKit engine and show the same prompt.
    2. Tap Start test. A dialog asks to access Motion and Orientation. Tap Allow.
    3. Turn the iPhone around each axis and watch the X, Y and Z values respond.
    4. Run Test all 3 moves, then lay the device flat for the stability test.
    5. Tap Download report to save a summary to the Files app.

    If you tapped “Don’t Allow”

    Safari remembers the choice for this website, so the prompt won’t show again straight away. To reset it:

    1. Close this tab, or swipe Safari away in the app switcher, then reopen the page and tap Start test.
    2. If the prompt still doesn’t appear, clear this site’s website data in Safari’s settings (Settings → Apps → Safari → Advanced → Website Data on recent iOS versions; older versions list Safari directly in Settings), then reload.

    Menu paths differ slightly between iOS versions. If the tester still reports Permission denied, try another iOS browser to confirm the sensor works.

    iPhone-specific notes

    • In-app browsers. Links opened inside some social or messaging apps may not show the motion prompt. Use Open in Safari.
    • Private Browsing and Lockdown Mode can limit some web features. If the test won’t start, try a normal tab.
    • Yaw starts at zero. On iOS, the yaw angle is measured from where the device pointed when the test began, not from compass north.
    • Update rate. Safari usually delivers motion data at around 60 Hz. Low Power Mode may reduce it.

    Which iPhones have a gyroscope?

    Every iPhone since the iPhone 4, and every iPad since the iPad 2, has a three-axis gyroscope. If the tester gets orientation angles but no rotation rate on a recent iPhone, the cause is almost certainly the browser or a permission, not missing hardware.

    Still stuck? See the troubleshooting guide.

    Ready to test your gyroscope?

    It takes under a minute, works in your browser, and nothing leaves your device.

    Start the gyroscope test